<address id="ousso"></address>
<form id="ousso"><track id="ousso"><big id="ousso"></big></track></form>
  1. 操作系統

    linux VPS常用安全設置

    時間:2025-02-18 21:53:19 操作系統 我要投稿
    • 相關推薦

    linux VPS常用安全設置

      一、修改SSH端口

      vi /etc/ssh/sshd_config

      找到其中的#Port 22(第13行),去掉#,修改成Port 3333

      使用如下命令,重啟SSH服務,注:以后用新端口登陸。

      service sshd restart

      二、禁止ROOT登陸

      先添加一個新帳號80st ,可以自定義:

      useradd 80st

      給weidao 帳號設置密碼:

      passwd 80st

      仍舊是修改/etc/ssh/sshd_config文件,第39行:#PermitRootLogin yes,去掉前面的#,并把yes改成no,然后,重啟SSH服務。以后,先使用weidao 登陸,再su root即可得到ROOT管理權限。

      login as: 80st

      weidao@ip password:*****

      Last login: Tue Nov 22 15:18:18 2011 from 1.2.3.4

      su root

      Password:*********** #注這里輸入ROOT的密碼

      三、使用DDos deflate簡單防落CC和DDOS攻擊

      使用netstat命令,查看VPS當前鏈接確認是否受到攻擊:

      netstat -ntu | awk ‘{print $5}’ | cut -d: -f1 | sort | uniq -c | sort -n

      IP前面的數字,即為連接數,如果說正常網站,幾十到一百都屬于正常連接,但出現幾百,或上千的就可以墾定這個IP與你的VPS之間可能存在可疑連接現象。

      可以使用iptables直接BAN了這個IP的永久訪問:

      iptables -A INPUT -s 12.34.56.78 -j DROP

      使用軟件DDos deflate來自動檢測并直接BAN掉的方法,首先要確認一下iptables服務狀態,默認CENTOS就安裝的,不看也行。

      service iptables status

      安裝DDos deflat:

      wget http://www.inetbase.com/scripts/ddos/install.sh

      chmod +x install.sh

      ./install.sh

      安裝后需要修改/usr/local/ddos/ddos.conf,主要是APF_BAN=1要設置成0,因為要使用iptables來封某些可疑連接,注意EMAIL_TO=”root”,這樣BAN哪個IP會有郵件提示:

      ##### Paths of the script and other files

      PROGDIR=”/usr/local/ddos”

      PROG=”/usr/local/ddos/ddos.sh”

      IGNORE_IP_LIST=”/usr/local/ddos/ignore.ip.list” //IP地址白名單

      CRON=”/etc/cron.d/ddos.cron”//定時執行程序

      APF=”/etc/apf/apf”

      IPT=”/sbin/iptables”

      ##### frequency in minutes for running the script

      ##### Caution: Every time this setting is changed, run the script with –cron

      ##### option so that the new frequency takes effect

      FREQ=1 //檢查時間間隔,默認1分鐘

      ##### How many connections define a bad IP? Indicate

      that below.

      NO_OF_CONNECTIONS=150 //最大連接數,超過這個數IP就會被屏蔽,一般默認即可

      ##### APF_BAN=1 (Make sure your APF version is atleast 0.96)

      ##### APF_BAN=0 (Uses iptables for banning ips instead of APF)

      APF_BAN=1 //使用APF還是iptables。推薦使用iptables,將APF_BAN的值改為0即可。

      ##### KILL=0 (Bad IPs are’nt banned, good for interactive execution of script)

      ##### KILL=1 (Recommended setting)

      KILL=1 //是否屏蔽IP,默認即可

      ##### An email is sent to the following address when an IP is banned.

      ##### Blank would suppress sending of mails

      EMAIL_TO=”root”//當IP被屏蔽時給指定郵箱發送郵件,推薦使用,換成自己的郵箱即可

      ##### Number of seconds the banned ip should remain in blacklist.

      BAN_PERIOD=600 //禁用IP時間,默認600秒,可根據情況調整

      四、使用iftop查看詳細網絡狀況

      安裝IFTOP軟件:

      yum -y install flex byacc libpcap ncurses ncurses-devel libpcap-devel

      wget http://www.ex-parrot.com/pdw/iftop/download/iftop-0.17.tar.gz

      tar zxvf iftop-0.17.tar.gz

      cd iftop-0.17

      ./configure

      make && make install

      安裝后,使用iftop運行,查看網絡情況。TX,發送流量;RX,接收流量;TOTAL,總流量;Cumm,運行iftop期間流量;peak,流量峰值;rates,分別代表2秒、10秒、40秒的平均流量。

      快捷鍵:h幫助,n切換顯示IP主機名,s是否顯示本機信息,d是否顯示遠端信息,N切換端口服務名稱,b切換是否時數流量圖形條。

      五、升級LNMP中的NGINX到最新版

      現在最新版是0.8.53,如果以后出新版,只要更新版本號就可以,在SSH里運行:

      wget http://www.nginx.org/download/nginx-0.8.53.tar.gz

      tar zxvf nginx-0.8.53.tar.gz

      cd nginx-0.8.53

      ./configure –user=www –group=www –prefix=/usr/local/nginx –with-http_stub_status_module –with-http_ssl_module –with-http_sub_module

      make

      mv /usr/local/nginx/sbin/nginx /usr/local/nginx/sbin/nginx.old

      cd objs/

      cp nginx /usr/local/nginx/sbin/

      /usr/local/nginx/sbin/nginx -t

      kill -USR2 `cat /usr/local/nginx/logs/nginx.pid`

      kill -QUI

      T `cat /usr/local/nginx/logs/nginx.pid.oldbin`

      /usr/local/nginx/sbin/nginx -v

      cd ..

      cd ..

      rm -rf nginx-0.8.53

      rm -rf nginx-0.8.53.tar.gz

      六、常用netstat命令:

      1.查看所有80端口的連接數

      netstat -nat|grep -i “80″|wc -l

      2.對連接的IP按連接數量進行排序

      netstat -ntu | awk ‘{print $5}’ | cut -d: -f1 | sort | uniq -c | sort -n

      3.查看TCP連接狀態

      netstat -nat |awk ‘{print $6}’|sort|uniq -c|sort -rn

      netstat -n | awk ‘/^tcp/ {++S[$NF]};END {for(a in S) print a, S[a]}’

      netstat -n | awk ‘/^tcp/ {++state[$NF]}; END {for(key in state) print key,” ”,state[key]}’

      netstat -n | awk ‘/^tcp/ {++arr[$NF]};END {for(k in arr) print k,” ”,arr[k]}’

      netstat -n |awk ‘/^tcp/ {print $NF}’|sort|uniq -c|sort -rn

      netstat -ant | awk ‘{print $NF}’ | grep -v ‘[a-z]‘ | sort | uniq -c

      4.查看80端口連接數最多的20個IP

      netstat -anlp|grep 80|grep tcp|awk ‘{print $5}’|awk -F: ‘{print $1}’|sort|uniq -c|sort -nr|head -n20

      netstat -ant |awk ‘/:80/{split($5,ip,”:”);++A[ip[1]]}END{for(i in A) print A,i}’ |sort -rn|head -n20

      5.用tcpdump嗅探80端口的訪問看看誰最高

      tcpdump -i eth0 -tnn dst port 80 -c 1000 | awk -F”.” ‘{print $1″.”$2″.”$3″.”$4}’| sort | uniq -c | sort -nr |head -20

      6.查找較多time_wait連接

      netstat -n|grep TIME_WAIT|awk ‘{print $5}’|sort|uniq -c|sort -rn|head -n20

      7.找查較多的SYN連接

      netstat -an | grep SYN | awk ‘{print $5}’ | awk -F: ‘{print $1}’ | sort | uniq -c | sort -nr | more

    【linux VPS常用安全設置】相關文章:

    VPS常用安全設置09-15

    Linux系統時間設置07-04

    linux設置開機啟動密碼08-29

    Linux系統的文件設置方法05-24

    linux的防火墻設置方法07-28

    java環境變量設置Linux08-07

    linux下防火墻設置10-26

    linux系統設置tomcat自啟動10-18

    vmware網卡如何設置成linux07-14

    <address id="ousso"></address>
    <form id="ousso"><track id="ousso"><big id="ousso"></big></track></form>
    1. 日日做夜狠狠爱欧美黑人