卡通飲水機底座產品完善及注射成形模具設計
摘要
近幾年，隨著機械工業的發展，注射模具制造技術在國內外得到了快速發展，注射模具應用的領域越來越廣泛。同時人們對注射模具設計的快速性和合理性以及產品的質量要求越來越高。
目前國外模具行業廣泛采用CAD/CAM技術，并通過3維設計軟件設計和仿真，大大的縮短了產品開發周期和制造周期，提高了模具的技術含量，降低了成本。相比之下，我國模具行業還有很大差距。針對目前注射模具行業的情況，我們必須根據國際模具工業的發展，綜合分析國外經驗，結合我國實際情況，采取有利措施，提高我國注射模具工業的競爭力。
本課題通過對卡通飲水機底座的分析，以UG、AutoCAD軟件為基礎，進行了卡通飲水機底座塑件模具的設計，利用參數化實體造型的方法，突破了AutoCAD3維實體造型功能不足的局限，為注射模具設計、加工和生產提供了1種切實可行的辦法。本課題取得了比較滿意的效果，達到了預期的設計意圖。
關鍵詞：注射模具；UG軟件；模具設計；飲水機；
Abstract
In recent years，with the development of manufacturing industry，an injection mould which was widely applied in many fields was been developed fast．Meanwhile，the higher requirement of the rapidity and rationality of the injection mould was proposed．
With the application of 3D design software and simulation，the lead time of a mould was shortened with an increase in technology content as well as a reduction in cost in foreign nations．While the development status at home was not very good．In terms of increasing the competitiveness of injection mould industry，foreign experience and development must be learned and effective measures should be taken．
After the analysis for the plastic the base of cartoon water supply machine，the injection mould of the base of cartoon water supply machine was designed by modeling created by parameters based on UG and AutoCAD．So the functional defect of 3D modeling based on AutoCAD was avoided and a feasible method for the design and manufacture of the injection mould was approached．In this paper，the desirable results and expected design were achieved．
Key words：injection mould；UG software；mould design；drinking fountains；
【卡通飲水機底座產品完善及注射成形模具設計】相關文章：
注射模具設計開題報告08-19
泵殼（Ｂ）的成形工藝與模具設計07-16
論產品嚴格責任原則的適用與完善10-29
我國涉外產品責任法律適用立法之完善08-04
飲水機設計文獻綜述10-24
完善我國產品責任保險法律制度的建議09-12
農產品物流配送信息化模式的提出與完善05-16
試論中國卡通品牌的發展10-21
論中國卡通品牌的發展09-12